?

Log in

No account? Create an account
Where haberdashery and geekdom combine
Pictoral Parking Demo (or, Becca's Insanity Revealed) 
3rd-Dec-2005 10:12 pm
B
Well, I got tons of positive feedback, so here's my little guide to
parking. I'm starting off with a disclaimer: This is only the way I
park, and
I'm laying no claims whatsoever to it being the only way. That being
said, feel free to link to this or put it somewhere else or whatever.
Just keep my name on it.








Ok! So I'm going to be taking you through how I stitched the second
page of my across the design stitching. It's a little strange to use this as a demo, because
it's an unusual bunch for me - because of where a page break was, I'm
doing 7 rows instead of my usual 5. Still, the method is the same.
Also, I use a tent stitch, so that's what you'll be seeing. Still the
method shouldn't really be different for a full cross.




Here's what it looks like when I've unwound the thread and am ready to begin.







As you can see, the threads are laid out fairly neatly. The couple of
short dark threads you can see are just my way of ending threads.
They're safe to ignore.





This is a closeup of the where I'll start to stitch. I've gridded 10
stitch columns, and for this bunch of rows I'm going from left to
right. Because I stitch an odd number of rows, the next group of rows
will be from right to left. You can see lots of parked threads waiting
to be stitched.







To start, I pick up the first thread in the top row, thread my needle,
and fill in all the stitches of that color. I then bring the needle up
through the hole where I would start the first stitch in row 8, and
then unthread, leaving it dangling. I always make sure to start my
stitches in the same relative hole, so I know when I pick up a thread
which symbol of the chart is corresponding to it.







Next, I pick up the second parked thread in the top row, and do the
same, filling in the color and bringing it up where I would start it in
row 8.








I continue this until I've stitched all the threads in the top row of the 10 stitch section between gridlines.







After this, I go back and stitch all the other threads within that 10
stitch column. I always stitch from the top row down, so I start by
looking for threads parked in row 2, then 3, and so on. As a note, when
I bring the threads up, sometimes there isn't a symbol in the next row
(row 8 ). That's totally ok, I just bring it up in the next row where
it's represented. Sometimes I'll skip as many as 40 rows to park the
thread, but that's my personal preference - other people might be
appalled to even see me suggest it.







This next photo shows that while I only pick up threads within a 10
stitch column at a time, I in no way confine myself to stitching within
this column. If it's a big chunk, I'll happily stitch over a 40-50
stitch wide section. I only stay within the column to pick up threads.
Here you can see how much of the next column over is already stitched,
even though I haven't yet picked up any threads in that column.







Sorry about the blur in the next one. I was really happy this situation
showed up in my current section, because you may have noticed I haven't
said anything yet about starting threads. That's because I almost
always leave new threads until I've stitched all the parked threads.
Right here is the exception. You can see (if you tilt your head and
squint) that the next to last stitch in that column in the top row
doesn't have a parked thread in it, yet all the stitches earlier in the
row are filled in. When I come across a stitch where a thread needs to
be started, and it's in the top row, I first check to see if I
accidentally parked the thread in the wrong place, but then will just
go ahead and start the new thread. I do this because I know that
there's no way this thread will get pulled in from a later colum - all
the stitches earlier than it have been filled in, and I only stitch in
one direction at a time.







Eventually, I finish up all the parked threads. I'm left with a section
that is mostly filled in, except for the occasional white space where I
need to start new threads. Note: This does not mean new colors. I've
been known to have upwards of a dozen threads of the same color started
at the same time. As long as they're separate sections, it doesn't
matter.







Finally! I've added in all the new threads, which are similarly parked
in the 8th row, and my threads have been straightened and lay out
nicely below.








After all of this, all that is left to do is curl up my threads and put them to rest while I work on the other 4 pages!







If you've made it all the way through, congratulations! There is no
prize. I hope you haven't run screaming. Please feel free to ask me any
questions you like - I will do my best to answer coherently.





Happy stitching!



Becca

Comments 
1st-Jan-2012 11:20 am (UTC)
Ohh! This is nice. So, let me summarize for you to make certain I understand what you're explaining here. It's just after 4am so please excuse my muddled brain. XD

To make it easier, let's just take one box (10x10.) You look to see what colors you need in that box and thread them, pull them through one hole, than stitch from one side to the other? And, once you've either done all that thread color in the box (or if the color runs out), you go to the next one over. That way you know which colors are which?

Did I grasp this correctly? You just do the stitches in whatever box you're working in currently to make things easier to remember, right?

Can I also ask you how you grid? I haven't gridded before (well, on my current project I sort did just to the extent of where the pattern started as the first page is only 1/4 full and that's in the lower right corner.) Can I grid now, over my existing stitches? It seems gridding would help with this.

Thanks! =) Sorry for all the questions.
2nd-Jan-2012 03:10 am (UTC)
It's always tricky to put this into words. Say in this row I'm stitching from left to right. In the box that's 10 stitches wide (I did 5 stitches long, but you can do 10, too) I pick up the floss, put in whatever stitches it's used for, and leave it in the top row it's needed in below my current stitching section, to the right.

Which is to say, if I'm stitching rows 1-5, I look to leave the stitch in row 6. If there's no stitches of that color in row 6, I check row 7, and so on. This way, I know if there's a spot in the top-most row that doesn't have a floss already in it, I need to start a new one.

I leave it to the right because the next row I stitch will be right to left. I alternate directions because I found it was easier to stitch in one direction, rather than having to stitch in more of a circle to end up where I started.

I know what colors are which because I can match where the thread is to the pattern, and that tells me what color it is.

Gridding, as the name implies, is the process of using thread to mark squares on the fabric. I actually gridded in columns, because knowing how many I was across was much more important than knowing how far down I was. If I was being thorough, I'd have made squares, but as I was working row by row (in 5s) it was very easy to keep track of rows.

It might be a bit tricky to grid over a stitched area, simply because the holes will be fairly tight with all the floss. I would grid in advance (using a rayon thread aimed at showing, because it was fluorescent and slippery) and then carefully stitch around the grid lines. Once I finished a page I'd pull out the gridding over that page. It usually took a little patience, but it all came out.

2nd-Jan-2012 04:51 am (UTC)
Do you use the same thread for the 5x5 if there is that color in more than one of the 5x5 rows or do you just stitch the one row straight cross and only go down one when the row above is finished? I hope that makes sense. Like, if in the 5x5, you have 959 in rows 1, 3, and 4, do you only stitch with that color in row 1 and then move onto the other colors in that row?

Thanks! =) I have a HAED QS I'm going to try this on.
2nd-Jan-2012 04:54 am (UTC)
Oh, yes, I use the same thread anywhere in the box, and in fact, I'll go further across that row if it makes sense based on the chart. I just use the columns as artificial boundaries to break things down into smaller sections.

Good luck with the HAED!
This page was loaded Jun 20th 2019, 11:19 pm GMT.